Published July 1, 2026 at 15:40
Anyone who has investigated moisture damage knows the drill: the client points to a discolored ceiling or wall and says, ”it’s somewhere around there.” The next two hours are spent systematically taking point measurements until you find the peak value. Then comes the debate over whether the leak is actually located right where the meter displays red, or several meters away where the water originally penetrated. What is missing isn’t more measurement points — it’s the big picture.
What IGM Technology Brings to the Table
FLIR’s MR176 moisture meter with built-in thermal camera solves this overview problem by combining a classic resistive moisture meter with an 80×60 pixel Lepton® thermal camera. The technology is called IGM — Infrared Guided Measurement. In plain English: the thermal camera shows you where to point the moisture probe.
Moisture reveals itself on the thermal image as a cooler area, because evaporative cooling draws heat away from the surface. A leaking pipe behind a drywall will appear as a distinct bluish patch against the wall’s ambient temperature. That patch is where you then measure with the moisture probe to quantify the issue.
Two Sensor Methods — Without Switching Instruments
The MR176 combines two measurement principles that usually require separate instruments:
Pinless (non-invasive) sensor: Reads moisture in the material down to a depth of ~2 cm without leaving holes. Ideal for an initial sweep across visible surfaces — finished walls, ceilings, floors, wallpaper. The client won’t see any marks from your inspection.
External pin probe: Two metal pins that measure electrical conductivity directly within the material. Delivers precise readings at specific depths — especially useful for wood, drywall, and insulation where you need to know if the damage is superficial or deep within the structure.
Where the Combination Makes a Real Difference
Restoration Professionals: Following water damage, the first question is always: how far has the water spread? A thermal camera quickly reveals the entire affected area — often far larger than the visible surface discoloration. This determines whether remediation should target 5 m² or 20 m².
Facility Managers: Hidden leaks in heating systems, condensation in attic spaces, pipe penetrations where the seal has failed. All these issues leave thermal signatures long before turning into visible stains. Regular IR scanning during routine operations becomes proactive preventive maintenance.
Building Inspectors: During property transfer inspections, a quick IR sweep reveals concealed risks — where a 15-minute time investment can bring significant clarity to the inspection report.
Insulation Specialists: Gaps and voids in wall insulation appear as thermal bridges on the thermal image, providing an immediate visual representation of where energy is being lost.
What You Get in the Field
An 80×60 pixel Lepton sensor isn’t a high-end stand-alone thermal camera, but it offers the exact right resolution for indoor localization work. Crucially, you don’t have to carry two separate devices — the thermal imager is integrated into the very same unit as the moisture probe.
Field-replaceable temperature/RH sensor, a laser pointer for precise target focusing, and documentation capabilities via free FLIR software so that images and readings can be exported directly into your report.
The economics are simple: locating a single leak accurately without having to tear open multiple walls easily pays for the instrument. For remediation professionals, facility managers, and building inspectors, the MR176 is more than just a tool — it’s an accelerator that cuts troubleshooting time from hours down to minutes.
Read more: FLIR MR176 moisture meter with thermal camera in our shop →