Published July 3, 2026 at 17:05
There are temperature measurements where contact is not just inconvenient — it is physically impossible or hazardous. Molten metal at 1,400 °C, a glass furnace at 1,200 °C, an industrial burner at 1,800 °C. No thermocouple probe survives direct contact at these temperatures, and even standing too close exposes the operator to both extreme temperatures and radiant heat. The standard answer is IR thermometers — but conventional models with a 12:1 or 16:1 distance-to-spot ratio require you to stand close to the object. For truly safe measurement, 50:1 or better is required. The 42570 IR thermometer combines this with an extra-wide measurement range of -50 to +2200 °C, dual lasers for distance indication, and a NIST-traceable calibration certificate for documentation.
What ”50:1 distance-to-spot ratio” means
The distance-to-spot ratio (D:S ratio) describes how far from the object you can stand and still measure a small area. With 50:1, it means: at a 50 cm distance, you measure a 10 mm spot. At a 2.5-meter distance, you measure a 5 cm spot. At 5 meters — a 10 cm spot.
This is dramatically better than standard models. A 12:1 IR thermometer at a 2.5-meter distance measures across a 20 cm circle — an average over a large area, unusable for zeroing in on a specific hot spot. A 50:1 IR thermometer at the same distance focuses on 5 cm — a genuinely usable level of detail.
What dual lasers add at long distances
At long measurement distances, knowing exactly where the measurement spot is located becomes challenging. A single red laser dot marks the center, but the size of the spot is hard to estimate. The 42570 utilizes dual lasers that are calibrated to converge precisely at the focal point. When the operator sees two separate dots on the object, the distance is not correct; when they merge into a single point, the object is at the focal distance and the measurement achieves its specified accuracy. This is an elegant mechanically resolved problem that eliminates the primary source of error in long-distance IR measurement.
The measurement range of -50 to +2200 °C — what it enables
The measurement range is exceptionally wide. From arctic cold (-50 °C) all the way up to molten steel (2200 °C is well above the melting point of iron at 1538 °C by a wide margin). This turns the instrument into a universal solution covering practically all industrial and laboratory applications.
An additional Type K thermocouple input (from -50 to +1370 °C) allows for contact measurement where IR is not suitable — for example, inside a container or in liquids.
A fast response time of 100 milliseconds means the instrument can track temperature changes in real time, which is critical for processes with rapid transitions (hardening, casting, melting).
Where the 50:1 optics excel
Metallurgy and foundries: Measuring molten metal in furnaces without having to stand right beside the melt. Monitoring the casting temperature during cooling from a safe distance.
Glass industry: Glass furnace temperature, glass preforming temperature, cooling profile. All of these are extremely hot and inaccessible for contact measurement.
Hardening and heat-treatment industry: Furnace temperatures, furnace wall temperatures, quench bath temperatures. Systematic monitoring of treatment cycles requires documented measurement from the outside of the furnace.
Power plants and power generation: Steam lines, boiler temperatures, generator shafts. Measurement during operation without shutting down equipment.
Petrochemical industry: Reactors, distillation columns, steam lines, flue gas ducts. Often featuring safety standoff distances that make a 50:1 instrument the only practical choice.
High-voltage electrical service: Transformer surfaces, conductor connections, switchgear. Measurement from a safe distance without having to open enclosures or approach live equipment.
Cement kilns and lime burning: Rotary kilns producing cement operate at extreme temperatures and are difficult to access. IR from a safe distance is the standard method.
Steel rolling mills: Monitoring roll brake temperatures, pipe production temperatures, cooling conveyor temperature profiles.
Emergency services and fire investigation: Assessing fire spread behind walls, inspecting storage areas where risks may be present. IR measurement from a safe distance prior to entry.
Volcanology and geosciences: Measuring lava, hot springs, and geothermal activity from a safe distance.
Other features worth mentioning
Adjustable emissivity: Different material surfaces have different capacities to emit thermal radiation. Raw metal and polished metal have completely different values. The instrument allows the user to adjust emissivity to compensate — critical for accurate measurements.
MAX/MIN/AVG/DIF functions: When scanning a furnace wall or a cooling conveyor, hot spots that deviate from the average become evident. The instrument automatically captures these deviations for subsequent analysis.
Adjustable high/low setpoints with alarms: Audible alarm when programmed temperature limits are exceeded. Practical for process control or safety verification.
USB interface: Data is transferred to a PC for documentation and trend analysis. Software is included.
NIST-traceable certificate: The documentation standard for industrial and laboratory measurements where regulatory documentation is required.
Rugged double-molded housing: Built for tough industrial environments, withstanding repeated handling and accidental drops.
What you get for your money
12,808 SEK is the investment that makes industrial measurements possible even under extreme temperatures and in hard-to-reach locations. For industrial technicians in metallurgy, glass, power generation, and the chemical industry, this instrument is standard equipment that quickly pays for itself through enhanced process control and avoided process failures.
Delivered complete with a Type K thermocouple probe, USB cable and software, carrying case, 9 V battery, and a NIST-traceable calibration certificate (five weeks delivery time).
Learn more: IR thermometer 42570 with 50:1 distance-to-spot ratio in the shop →