Hoppa till innehåll
Free shipping over SEK 3,000 excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The camera pinpoints the suspect, the measurement probes confirm the faultThe display shows three values simultaneously – exactly as many as you needDon’t look for a value, look for what deviates from its neighborsThe laser dot is not what you measure, it only indicates the center of the measurement spotA calibration certificate doesn’t prove the measurement is correct, only that the instrument isn’t wrongMultimeter with thermal imaging camera — the most important measurement is the one you make before opening the cabinetIR Thermometer with Thermocouple Input — Infrared Always Measures a Surface, Never What Lies Beneath ItAdjustable Emissivity 0.10–1.00 — Why Your IR Thermometer Gives Inaccurate Readings on Shiny MetalIR thermometer with 50:1 optics — at a distance of two meters, an 8:1 thermometer measures an area the size of a dinner plateExtech IR267 mini IR thermometer 12:1 with type K input up to 600 °C: When 903 kr is enough for surface temperature, core temperature AND air temperature in ONE compact bodyVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The camera pinpoints the suspect, the measurement probes confirm the faultThe display shows three values simultaneously – exactly as many as you needDon’t look for a value, look for what deviates from its neighborsThe laser dot is not what you measure, it only indicates the center of the measurement spotA calibration certificate doesn’t prove the measurement is correct, only that the instrument isn’t wrongMultimeter with thermal imaging camera — the most important measurement is the one you make before opening the cabinetIR Thermometer with Thermocouple Input — Infrared Always Measures a Surface, Never What Lies Beneath ItAdjustable Emissivity 0.10–1.00 — Why Your IR Thermometer Gives Inaccurate Readings on Shiny MetalIR thermometer with 50:1 optics — at a distance of two meters, an 8:1 thermometer measures an area the size of a dinner plateExtech IR267 mini IR thermometer 12:1 with type K input up to 600 °C: When 903 kr is enough for surface temperature, core temperature AND air temperature in ONE compact body

FLIR TG167 spot thermal camera: The bridge between single-point IR thermometers and full-scale thermal cameras showing the entire thermal field

Published July 4, 2026 at 16:15

The classic IR thermometer has a fundamental problem: it measures a single spot, but the user does not know where that spot is until the reading has already been taken. The laser pointer shows where the measurement spot is aimed, but it does not reveal if there is a hotspot 5 cm to the side. An electrician searching for an overheated contact must systematically sweep the entire panel and read every single measurement value — which is both time-consuming and risks missing problem spots between readings. A thermal imaging camera, on the other hand, displays the entire thermal field instantly, but full-scale models (320×240 pixels and up) cost 20 000 – 100 000 kronor and are oversized for most routine tasks. The FLIR TG167 bridges the gap between these two worlds.

What an ”80×60 pixel thermal sensor” means in practice

FLIR TG167 uses FLIR’s Lepton micro thermal sensor — one of the smallest commercially available thermal image sensors. It captures 4 800 thermal pixels (80×60) in every image. This is approximately 60 times more measurement points than a standard IR thermometer (which effectively measures a single pixel), yet only about 16 times fewer than a 320×240-pixel professional camera.

Practical consequence: a single TG167 image of an electrical cabinet contains thermal information about every individual component, cable, and contact within the field of view — not just where the laser pointer happened to aim. Hotspots appear immediately as brighter colors (typically red/yellow against a blue/green background).

FLIR TG167 Spot-värmekamera 80x60 pixels termisk sensor

How a ”spot thermal camera” differs from a full-scale camera

Even though the TG167 displays a thermal field, its primary function is still spot measurement. The instrument features a center-marker system that shows the exact temperature where the user points. The image surrounding the center point serves as an aid that indicates where areas of interest are located — but the exact numerical reading applies to the center point.

This makes the TG167 a guided IR thermometer: the user sees in advance where the problem is located, aims the center marker there, and reads the exact value. In practice, this is the optimal methodology for most troubleshooting tasks.

Full-scale thermal imaging cameras are more oriented toward image analysis — where you document temperature distributions across larger areas, perform quantitative comparisons between zones, or generate detailed thermographic reports for clients.

What a ”9 Hz refresh rate” means

The TG167 updates the image 9 times per second — fast enough to smoothly track handheld camera movement, but deliberately restricted. There are technical and legal reasons for this:

Technical: A faster refresh rate would require more processing power, resulting in a larger battery and shorter operating time.

Legal: Thermal sensor cameras with a frame rate above 9 Hz are classified as ”military-grade” and regulated by US export controls (ITAR). Keeping it below this threshold allows the camera to be exported without a special license — which is critical for international sales.

The 25° field of view — and why it was chosen

The field of view is 25° (relatively narrow for a thermal camera; a full-scale camera typically has 45-60°). This provides two main advantages:

Better effective resolution: With the same number of pixels distributed across a smaller field of view, each pixel becomes more detailed. At a distance of 1 meter, each pixel represents approximately 5.5 mm — small contacts and cables are clearly visible.

Measurement at greater distances: Electrical technicians must often measure panels from a safe distance (no closer than the required working distance considering protective equipment). A 25° field of view is sufficient to capture a standard-sized electrical enclosure from 1.5-2 meters away.

What data logging enables

The TG167 stores images and data both internally and on a removable micro SD card. Each image includes the exact temperature reading at the center point, a timestamp, and the complete thermal image.

Practical benefits for professional use:

Customer reports: Service technicians can save thermal images from customer visits and include them in reports. The customer sees what the technician saw — building trust and making it easier to gain approval for proposed repairs.

Trend documentation: During periodic monitoring of the same facility over time, images from different dates can be compared. Hotspots that worsen over time are clearly identifiable.

Insurance and legal documentation: In fire or failure investigations, documented thermographic measurements from previous inspections can serve as vital evidence.

Durability — and why the 2-meter drop test matters

The instrument is designed to withstand a 2-meter drop without damage. This is not just a marketing detail: for an electrician climbing ladders, handling heavy tools, or working in confined spaces, there is a high probability that the instrument will be dropped at some point. A thermal measurement instrument that breaks after a single drop is practically useless in a workshop environment.

Where the TG167 excels

Electrical engineering and maintenance: Overheated contacts, fuses, breakers, cables, terminal blocks. Thermal inspection is the standard method for preventive maintenance in electrical systems.

HVAC service: Refrigeration compressors, condensers, cooling ducts, defrosting systems. Uneven cooling or overheated components are identified instantly.

Plumbing systems: Water leaks behind walls, poor insulation, faulty pipe installations. Thermal imaging reveals problems that are invisible to the naked eye.

Building insulation: Heat loss around windows, doors, wall penetrations. Critical for energy efficiency assessments.

Motor and mechanical systems: Overheated bearings, stressed motor windings, misaligned couplings. Trend monitoring of rotating equipment.

Emergency services: Searching for missing persons, assessing fire spread behind walls, identifying residual hotspots after fire suppression.

Pest control and building inspection: Termite activity, rodent nesting areas, cracks causing thermal leakage.

Industrial quality control: Uneven heating in curing ovens, defects in heat treatment processes.

Automotive service: Engine diagnostics, brake system overheating, cooling system checks. Fast visual-thermal overview.

Education: Hands-on demonstration of thermodynamics and heat transfer. A powerful educational tool.

What you get for your money

FLIR TG167 spot thermal camera with Lepton 80×60 pixel thermal sensor, 9 Hz refresh rate, 25° field of view, measurement range from -25 to +380 °C, integrated visual camera for image fusion, micro SD card storage, USB transfer, dual laser pointers for precise targeting, rugged construction tested for 2-meter drops, lithium-ion battery.

3 774 kronor is an investment that fills a real gap in the toolbox — more advanced than a basic IR thermometer, yet far more affordable than a full-scale thermal camera. For HVAC technicians, electricians, building inspectors, and maintenance personnel, it is often the tool users find they need much more than they realized before trying it.

Read more: FLIR TG167 spot thermal camera in our shop →

More news

All news