Hoppa till innehåll
Free shipping over SEK 3,000 excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The camera pinpoints the suspect, the measurement probes confirm the faultThe display shows three values simultaneously – exactly as many as you needDon’t look for a value, look for what deviates from its neighborsThe laser dot is not what you measure, it only indicates the center of the measurement spotA calibration certificate doesn’t prove the measurement is correct, only that the instrument isn’t wrongMultimeter with thermal imaging camera — the most important measurement is the one you make before opening the cabinetIR Thermometer with Thermocouple Input — Infrared Always Measures a Surface, Never What Lies Beneath ItAdjustable Emissivity 0.10–1.00 — Why Your IR Thermometer Gives Inaccurate Readings on Shiny MetalIR thermometer with 50:1 optics — at a distance of two meters, an 8:1 thermometer measures an area the size of a dinner plateExtech IR267 mini IR thermometer 12:1 with type K input up to 600 °C: When 903 kr is enough for surface temperature, core temperature AND air temperature in ONE compact bodyVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The camera pinpoints the suspect, the measurement probes confirm the faultThe display shows three values simultaneously – exactly as many as you needDon’t look for a value, look for what deviates from its neighborsThe laser dot is not what you measure, it only indicates the center of the measurement spotA calibration certificate doesn’t prove the measurement is correct, only that the instrument isn’t wrongMultimeter with thermal imaging camera — the most important measurement is the one you make before opening the cabinetIR Thermometer with Thermocouple Input — Infrared Always Measures a Surface, Never What Lies Beneath ItAdjustable Emissivity 0.10–1.00 — Why Your IR Thermometer Gives Inaccurate Readings on Shiny MetalIR thermometer with 50:1 optics — at a distance of two meters, an 8:1 thermometer measures an area the size of a dinner plateExtech IR267 mini IR thermometer 12:1 with type K input up to 600 °C: When 903 kr is enough for surface temperature, core temperature AND air temperature in ONE compact body

Chauvin Arnoux CIR423 Dual-Laser IR Thermometer 16:1: When Two Laser Dots Show the Actual Spot Outer Diameter Instead of Guessing

Published July 6, 2026 at 22:02

Non-contact temperature measurement using an IR thermometer is based on the sensor optics collecting infrared radiation from a defined ”measurement spot” on the target object. The size of the spot varies linearly with distance — and this is precisely where the operator’s most common misunderstanding lies. Almost all basic IR thermometers feature a laser pointer that marks the center of the measurement spot, but NOT its outer edge. At short distances, this is harmless; at greater distances, the measurement spot can be several times larger than the operator expects, resulting in a reading that is an unquantified average of several different surfaces.

What the Chauvin Arnoux CIR423 is

The CIR423 with dual laser and distance-to-spot ratio 16:1 from Chauvin Arnoux is a professional handheld IR thermometer where the standard single-laser pointer has been replaced by two converging laser beams that mark the outer edges of the measurement spot in real time. The instrument:

  • Features a 16:1 optical resolution — measurement spot diameter is distance/16.
  • Features dual lasers indicating the outer diameter of the measurement spot.
  • Features an external thermocouple input (Type K) for contact measurement.
  • Features adjustable emissivity from 0.10 to 1.00 for different materials.
  • Features alarms for high/low temperatures and temperature differential.
  • Features an averaging function for scanning measurements.
  • Measures up to 860 °C — covering most industrial applications.

Basic specifications:

  • Distance-to-Spot Ratio (D:S): 16:1
  • Measurement spot diameter: 1 m distance = 62 mm, 500 mm distance = 31 mm, 100 mm distance = 6 mm
  • IR temperature range: -30 °C to +860 °C
  • Thermocouple input: Type K, -50 °C to +1370 °C
  • Accuracy: ±1% or ±1 °C (whichever is greater)
  • Resolution: 0.1 °C
  • Emissivity: 0.10–1.00 (adjustable)
  • Laser sighting: Dual Class 2 laser
  • Alarm functions: High/low threshold, differential, average
  • Display: Digital backlit LCD
  • Battery: 9 V (type 6LR61)

Chauvin Arnoux CIR423 IR-termometer med dubbel laser 16:1

What D:S 16:1 actually means in practice

The distance-to-spot ratio (D:S ratio) is the relationship between the distance to the target surface and the diameter of the measurement spot. A 16:1 optic means: at a distance of 16 cm, the measurement spot is 1 cm wide; at a distance of 160 cm, the measurement spot is 10 cm wide; and so on.

Practical consequences of not understanding spot size:

  • Circuit board with a 5 mm hot IC among cool components: At a distance of 100 mm, the spot is 6 mm — only marginally larger than the IC. At 300 mm, the spot becomes 19 mm and includes the entire IC plus the surrounding cool PCB. The temperature reading will then be lower than the actual temperature of the IC.
  • Soldering: recommended peak temperature 260 °C: If the laser dot is aimed at the solder joint but the spot includes cool cable insulation around it, the reading will show 200–220 °C, leading the operator to believe the joint is too cold — and apply too much heat.
  • Electrical connection inspection: Suspected hot spot in a terminal connection. If the spot is larger than the connection itself, you will never see the localized hot spot indicating poor contact.

The dual-laser solution shows the outer boundaries of the measurement spot in real time: two laser dots converge as the thermometer moves closer, and move apart as it moves away. The operator sees exactly what size area is being measured.

Emissivity — the other common source of error

IR thermometers calculate temperature from infrared radiation intensity according to the Stefan-Boltzmann law. The formula assumes an emissivity of ε = 1 (a perfect blackbody radiator). Real-world materials have lower emissivity:

  • Polished aluminum: ε ~ 0.05 (highly reflective, very difficult to measure with IR)
  • Rusted or oxidized metal: ε ~ 0.80
  • Painted surface: ε ~ 0.90–0.95
  • Wood: ε ~ 0.90
  • Textiles, paper: ε ~ 0.95
  • Black matte tape (reference tape): ε ~ 0.95

An incorrect emissivity setting can cause errors of 20–30 °C. A polished aluminum surface at 80 °C can read as 200 °C if the instrument is set to ε = 0.95. The CIR423’s adjustable emissivity of 0.10–1.00 allows the operator to match the setting to the specific material.

A practical tip: for difficult-to-measure shiny surfaces, apply a piece of black matte tape to the surface. The tape reaches thermal equilibrium with the substrate after ~30 seconds, allowing you to measure the tape (ε = 0.95). This yields an accurate temperature even on polished, reflective materials.

Where dual lasers make a real difference

Electronics diagnostics: Circuit boards with small hot components among cool ones. The correct spot size ensures you measure individual component temperatures rather than an average value.

Motor and bearing diagnostics: Rolling element bearings develop localized hot spots at worn zones. A spot larger than the bearing itself provides no diagnostic value.

Electrical enclosure inspections: Loose connection points become hot spots. A precise measurement spot allows you to identify the specific terminal that is causing the issue, rather than just seeing that the cabinet is warm.

Soldering process control: Wave soldering baths and infrared reflow oven exits can be inspected with a well-defined measurement spot.

Automotive workshops: Brake disc temperatures after driving, engine cylinder head temperatures, and exhaust manifold temperature distribution.

HVAC and ventilation balancing: Duct surface temperatures to verify airflow and insulation performance.

Food manufacturing: Oven surfaces, convection cooktops, and conveyor belt surfaces where contact measurement would compromise hygiene.

Building thermal diagnostics: Thermal bridges in walls, leaky windows, and cold spots on ceilings.

Heating and radiator system inspection: Surface temperatures on older radiators suspected of uneven flow. Spot size must be smaller than the radiator section.

Metalworking, forging, and foundries: Monitoring working temperatures of metal workpieces. The thermocouple jack allows contact measurement as secondary verification.

Thermocouple input — why it is included

The CIR423 features an external thermocouple input (Type K) — which might seem unusual on an IR thermometer. The purpose is verification:

  • In situations with uncertain emissivity (such as bare metal), the operator places the thermocouple probe on the surface for a contact measurement. The IR reading is then compared to the contact reading.
  • A discrepancy indicates an emissivity error. The emissivity setting is adjusted until the IR reading matches the thermocouple reading.
  • Once calibrated and verified, the operator can proceed with IR measurements on similar surfaces with full confidence.

This is standard practice in industrial temperature diagnostics.

What you get for your money

The Chauvin Arnoux CIR423 IR thermometer with dual laser, 16:1 optical resolution, temperature range from -30 to +860 °C (IR) and -50 to +1370 °C (Type K thermocouple), accuracy of ±1% / ±1 °C, adjustable emissivity 0.10–1.00, alarm functions (high/low/differential), average value scanning, digital backlit LCD, and a 9 V battery.

2,015 SEK is the investment for the instrument. Compared to single-laser IR thermometers (300–1,500 SEK, 8:1 or 12:1 optics without outer-edge marking), the CIR423 is a larger investment, but it eliminates the most common cause of incorrect IR readings — an unknown measurement spot size. The thermocouple input also eliminates the need for a second instrument for contact verification during emissivity checks.

Learn more: CIR423 IR thermometer with dual laser in the shop →

More news

All news